diff --git a/src/platforms/rcore_desktop_sdl.c b/src/platforms/rcore_desktop_sdl.c
index 98054875a..cf11037cb 100644
--- a/src/platforms/rcore_desktop_sdl.c
+++ b/src/platforms/rcore_desktop_sdl.c
@@ -463,8 +463,7 @@ void ToggleFullscreen(void)
     const int monitorCount = SDL_GetNumVideoDisplays();
 
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -492,8 +491,7 @@ void ToggleBorderlessWindowed(void)
     const int monitorCount = SDL_GetNumVideoDisplays();
 
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -550,8 +548,7 @@ void SetWindowState(unsigned int flags)
         const int monitorCount = SDL_GetNumVideoDisplays();
 
     #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-        SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-        if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+        if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
     #else
         if ((monitor >= 0) && (monitor < monitorCount))
     #endif
@@ -615,8 +612,7 @@ void SetWindowState(unsigned int flags)
         const int monitorCount = SDL_GetNumVideoDisplays();
 
     #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-        SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-        if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+        if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
     #else
         if ((monitor >= 0) && (monitor < monitorCount))
     #endif
@@ -837,8 +833,7 @@ void SetWindowMonitor(int monitor)
 {
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -854,8 +849,7 @@ void SetWindowMonitor(int monitor)
         SDL_Rect usableBounds;
 
     #if defined(USING_VERSION_SDL3) // Different style for success checking
-        SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-        if (SDL_GetDisplayUsableBounds(monitor, &usableBounds)) // Returns true on success, which confirms that the monitor is valid
+        if (SDL_GetDisplayUsableBounds(monitor, &usableBounds))
     #else
         if (SDL_GetDisplayUsableBounds(monitor, &usableBounds) == 0)
     #endif
@@ -967,8 +961,7 @@ Vector2 GetMonitorPosition(int monitor)
 {
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -996,8 +989,7 @@ int GetMonitorWidth(int monitor)
 
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -1018,8 +1010,7 @@ int GetMonitorHeight(int monitor)
 
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -1040,8 +1031,7 @@ int GetMonitorPhysicalWidth(int monitor)
 
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -1065,8 +1055,7 @@ int GetMonitorPhysicalHeight(int monitor)
 
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -1090,8 +1079,7 @@ int GetMonitorRefreshRate(int monitor)
 
     const int monitorCount = SDL_GetNumVideoDisplays();
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif
@@ -1111,8 +1099,7 @@ const char *GetMonitorName(int monitor)
     const int monitorCount = SDL_GetNumVideoDisplays();
 
 #if defined(USING_VERSION_SDL3) // SDL3 Migration: Monitor is an id instead of index now, returns 0 on failure
-    SDL_Rect displayBoundsRect; // Different SDL_Rect variable from displayBounds to avoid overwriting it
-    if (SDL_GetDisplayUsableBounds(monitor,  &displayBoundsRect)) // Returns true on success, which confirms that the monitor is valid
+    if (SDL_GetDisplayProperties(monitor) != 0) // Returns 0 on failure, so a value other than zero indicates that the monitor id is valid
 #else
     if ((monitor >= 0) && (monitor < monitorCount))
 #endif